This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TLV320AIC3204
We’ve been debugging an issue with trying to match the codec output rate with our Bluetooth A2DP streaming rate (which should ideally be 44.1 kHz).
More specifically, we’re using register values corresponding to 16 MHz MCLK setting of 44.1 kHz section of Table 2-27 in TLV320AIC3204 Application Reference Guide.
Unfortunately, the A2DP input rate is lower than 44.1 kHz causing underflows on the output and corresponding audio artifacts.
So, to rate match to it, we modified just PLLD value from 2920 (in the table) to 2779 with all other settings unchanged. With this, we were able to rate match nicely with the BT input audio (no more underflows or overflows).
But now there’s an overwhelming hiss on the codec output which is not acceptable from audio quality perspective.
The hiss doesn’t happen with PLLD value of 2920.
Can you shed some light on what might be causing the hiss on the codec output when we change just the PLLD setting?
We need to fix this to be able to rate match for a Bluetooth use case.
Wilson - TI Medical/ Health & Fitness Team
Please Click Verify if we've answered your post completely.
Thanks for the problem description. Changing the PLL coefficient will affect the internal clocks, which could lead into issues with the device processing and performance. Is it possible to adjust the BT module sampling rate?, maybe 32KHz or lower could be used.
-Diego Meléndez López Audio Applications Engineer
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.