This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPA2029D1
Please help to provide the electrical characteristics of RL=4ohm.
We now use 4ohm speaker, but datasheet only list the parameter on RL=8ohm.
Please kindly help.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Ivan Salazar:
In reply to daniel:
Daniel,Attached are a couple graphs for 4 Ohm load. As you can see the performance is pretty much the same as 8 ohm load, this is mainly due to the AGC and compressor.
Data sheet includes THD+N vs Freq and vs Output Power, as well as efficiency, power dissipation, output power vs power supply, all these for both 4 and 8 ohm loads.Best regards,-Ivan SalazarApplications Engineer - Low Power Audio & Actuators
Thanks for your support
Please kindly help to provide the graph as figure2~figure9 in data sheet for 4ohm.
Customer request these graph data to design in.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.