This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TAS5760M: Bootstrap Capacitance

Guru 19390 points

Replies: 3

Views: 525

Part Number: TAS5760M

Hi,

The bootstrap capacitance is 0.22uF on design sample of the datasheet.

However my customer must change this value because arranging for 0.22 uF capacitors is so difficult.

Could you show me another recommended value of boot capacitance ?

Best Regards,

Kuramochi

  • If it is difficult to source 0.22uf caps, our recommendation would be 2 0.1uF caps in parallel.
  • In reply to Andy Liu SH:

    Hi Andy-san,

    Thank you for your quick response.

    I have an additional question.
    Could you please show me the min/max recommended boot capacitance?

    Best Regards,
    Kuramochi
  • In reply to Kuramochi Tadahiko:

    Hi Kuramochi-san,

    This device has been optimized for 0.22uF caps and therefore there is no min/max.

    Andy

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.