This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: PCM4202
More questions about PCM4202 cropping up as my customer is on the verge of releasing boards to production:
In my application I adjust the phase of my incoming data based the phase of my transmitter relative to the left right clock. The phase adjustment is at the resolution of the bit clock (1/64 of the L/R clock). The *RST line of the PCM4202 is tied to 3.3V
The system works as expected most of the time however I have had some power cycles where the phase may be off on one or more of the a/d converters (6 total on the board). This may be related to the power rails no fully discharging or voltage rises being inconsistent resulting in each of the PCM4202 resetting at different times.
I can turn power off and back on to correct the problem. I have also been able to create the error by “tapping” ground to the *RST pin while the system is running.
Is the A/D sampling (at the 48KHz rate) asynchronous with the left right clock (different phase depending on when the reset occurs)?
If *RST is tied high is the phase determined by when reset occurs based Vdd and Vcc ?
If I drive the reset signal to all the converters on the board will they be in phase with each other?
What is the best way to guarantee a known phase from all the converters?
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.