Hi
I'm using TPA3110D2 and trying to control volume by adjust the PVCCL/PVCCR.
Is there any other problem when changing the voltage during the amp operation.
Thanks
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sujin,
Kato-san gave the perfect answer in above. The gain is not adaptable with power supply, and this device has 4 gain settings(refer to section 9.3.2 in the datasheet).
Best regards,
Shawn Zheng