TLV320AIC3253: purepath studio installation issue: "Error reading setup initialization file"

WU YISYUAN

Expert 2165 points

Part Number: TLV320AIC3253
Other Parts Discussed in Thread: PUREPATHSTUDIO

Hi,

I apply software:PUREPATHSTUDIO. (setup_PurePath_Studio_Portable_Audio_MiniDSP_v5.95_build1_rev35815)

but show up the issue:Error reading setup initialization file, how to solve it.

thanks.

over 5 years ago

0 Diego Melendez over 5 years ago

TI__Guru 57800 points

Hi, Wu,

Can you please try downloading the installer for PurePath Studio with a different network?.

This issue has been reported before, typically a network issue during the download of the installer may cause issues to the file.

Best Regards,

-Diego Meléndez López
Audio Applications Engineer

0 ATAN over 5 years ago in reply to Diego Melendez

Prodigy 125 points

I encountered the same problem, I tried to download using different network and PC, but still could not install correctly, 1152 error number appeared. Can you update another link?

0 Diego Melendez over 5 years ago in reply to ATAN

TI__Guru 57800 points

Hi,

Can you please provide a capture of the error you are getting?. In some occasions, the installer needs to run with administrator rights and in compatibility mode. Have you tried this?

Best Regards,

-Diego Meléndez López
Audio Applications Engineer

0 ATAN over 5 years ago in reply to Diego Melendez

Prodigy 125 points

Hi,

I tried to run with administrator rights and in compatibility mode,but still could not install successfully.

0 Diego Melendez over 5 years ago in reply to ATAN

TI__Guru 57800 points

Hi,

Thanks for the additional information. If running the software as admin in compatibility mode doesn't work, It is likely that the file is corrupt. I can share a working version of PPS, please send me your email address on a private e2e message.

Best Regards,

-Diego Meléndez López
Audio Applications Engineer

0 ATAN over 5 years ago in reply to Diego Melendez

Prodigy 125 points

Hi,

em ail : tanxiaobo^^newglee.com. Please use '@' instead of '^ ^'. thank you!

0 Quentin Hameau over 5 years ago in reply to Diego Melendez

Prodigy 20 points

HI,

I'm having the same "Error reading setup initialization file" even after downloading the file on a stable network and running it as admin in compatibility mode. Could you share another download link ?

I can send you an email address via private message.

Best regards,

Quentin Hameau

0 Diego Melendez over 5 years ago in reply to Quentin Hameau

TI__Guru 57800 points

Hi,

I have sent you the link for the PPS installer I have used before. Please download it and check if it works.

Best Regards,

-Diego Meléndez López
Audio Applications Engineer

0 Quentin Hameau over 5 years ago in reply to Diego Melendez

Prodigy 20 points

Hi,

I had no problem with the installer this time, it works great, thank you Diego !

Best regards,

Quentin Hameau

0 ATAN over 5 years ago in reply to ATAN

Prodigy 125 points

Hi,

Did you send me the link? I don't know how to send you private e2e messages.

0 Diego Melendez over 5 years ago in reply to ATAN

TI__Guru 57800 points

Hi, Atan,

I sent you the download Link via email, It is not possible to send it through e2e message, I asked for the connection so you can share your contact information.

Best Regards,

-Diego Meléndez López
Audio Applications Engineer

0 ATAN over 5 years ago in reply to Diego Melendez

Prodigy 125 points

Hi Diego,

I did not receive the email with the download address. I will send you a connection request again and attach my email address. Thank you!

Audio

Audio forum

TLV320AIC3253: purepath studio installation issue: "Error reading setup initialization file"