This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Do you have a list of common questions for TI's families of Audio ADCs, CODECs, and Audio Transceiver devices?
Regards,Collin WellsPrecision ADC Applications
[FAQ] TLV320AIC CODECs: Windows 7 Compatibility of TLV320AIC EVMs
[FAQ] TLV320AIC CODECS and ADCs: How to restart / revive a USB Audio EVM
[FAQ] TLV320AIC CODECs: CODEC Control Foreign Language Installation Challenges
TLV320AIC CODECs and TLV320ADC Audio ADCs:
[FAQ] Linux Drivers: Device drivers for AIC31xx/DAC31xx/AIC325x/AIC320x/AIC326x/AIC321x
[FAQ] Audio ADCs/CODECs: What should I do with unused inputs on the TLV320ADC and TLV320AIC family of devices?
[FAQ] TLV320AIC CODECs: What I2C speeds/frequencies are supported by the TLV320AICxxxx devices?
[FAQ] TLV320AIC CODECs: Input clock jitter and noise specifications
[FAQ] TLV320AIC CODECs: How do I calculate the input impedance of an TLV320AIC device?
[FAQ] TLV320AIC CODECs: What is the maximum output load capacitance on the headphone amplifier outputs?
[FAQ] TLV320AIC CODECs: How do I synchronize multiple CODECs?
[FAQ] TLV320AIC CODECs: Can I drive high impedance loads with a headphone amplifier?
[FAQ] TLV320AIC CODECs: High DAC output noise when running at low sampling rates
TLV320 Mini-DSPs and PurePathStudio (PPS):
[FAQ] TLV320AIC CODECs and ADCs: How To Get started with PurePath Studio
[FAQ] TLV320AIC CODECS and ADCs: How do I develop code for the miniDSPs inside the TLV320AIC CODECs and ADCs?
[FAQ] TLV320AIC CODECS and ADCs: Modifying the device configuration of a PPS process flow
[FAQ] TLV320AIC CODECs and ADCs: How to change a coefficient dynamically without MCU interaction
[FAQ] TLV320AIC CODECs: Converting from linear or dB values into hex values
[FAQ] TLV320AIC CODECs: How to transfer a completed design from Pure Path Studio (PPS) into the TLV320AIC3254 device?
[FAQ] TLV320AIC3254: miniDSP_D_Cycles and miniDSP_A_Cycles in the TLV320AIC3254 CODEC
[FAQ] TLV320AIC3254: What is the purpose of p0_r60_b7-6 in TLV320AIC3254?
[FAQ] TLV320AIC3254: How and when can the C-RAM and I-RAM of the TLV320AIC3254 miniDSP be accessed?
TLV320AIC3254, TLV320AIC3204, TLV320AIC3253, TLV320AIC3256, TLV320AIC3206 CODECs
[FAQ] TLV320AIC3254: Design and Configuration Guide for the TLV320AIC3204 and TLV320AIC3254 Audio Codecs
[FAQ] TLV320AIC3254: Recommended power supply sequence for TLV320AIC family of CODECs
[FAQ] TLV320AIC3254: Microphone Scripts for the TLV320AIC3254 and TLV320AIC3204 CODECs
[FAQ] TLV320AIC CODECs: Electret Condenser Microphone Noise Reduction Techniques using TLV320AIC32x4 CODECs
[FAQ] TLV320AIC3254: Should I connect a capacitor to a MICBIAS pin? What should I do about noise?
[FAQ] TLV320AIC3254: TLV320AIC32xx Family Headset Detection
[FAQ] TLV320AIC3254: TLV320AIC32xx Family Beep Generator Configuration
TLV320AIC3104, TLV320AIC3100, TLV320AIC3110, TLV320AIC3120 CODECs
[FAQ] TLV320AIC3104: Line Out - Output Impedance
[FAQ] TLV320AIC3104: How do you program the AIC3104 1st order HP filter?
[FAQ] TLV320AIC3104: ADC clicking noise when adjust analog input gain (either Mixer gain or PGA gain)
[FAQ] TLV320AIC3100: TLV320AIC3100 and TLV320AIC1110 Beeps or Tones
[FAQ] TLV320AIC3110: Typical power consumption of the TLV320AIC31xx family of devices
[FAQ] TLV320AIC3120: Change sampling frequency dynamically on the TLV320AIC3120 \
[FAQ] TLV320AIC23: Pinout of the TLV320AIC23
PCM18xx ADCs and CODECs:
[FAQ] PCM1861EVM: Using the EVM without GUI or USB-to-I2X interface board
[FAQ] PCM1860: What should I do with unused inputs on the PCM1860 and other devices in the PCM186x family?
PCM42xx High Performance Audio ADCs:
[FAQ] PCM4220: PCM4220 Idle Tone
[FAQ] PCM4220: PCM422x thermal impedance data
[FAQ] PCM4204: PCM4204 Ch-to-Ch THD Performance
Audio Transciever Devices
[FAQ] PCM9211: Using device with no XTAL
[FAQ] PCM9211: Recommendation for ADC input connection when ADC is not used
[FAQ] PCM9211: Simultaneous conversion of S/PDIF to I2S AND Analog line-in to I2S audio streams
[FAQ] DIR9001: XTAL requirement
[FAQ] DIR9001: Use for external XTAL & Measuring sampling frequency of incoming audio stream
[FAQ] DIR9001: Purpose of AUDIO (pin 1)
[FAQ] DIR9001: Handling of UNUSED XTI pin when XTAL is not used
Sample Rate Converters:
[FAQ] SRC4192: Behavior of output data lines with no audio input stream
[FAQ] SRC4192: Handling of MUTE pin for SRC4192
[FAQ] SRC4192: Handling of Mode pins for SRC4192
[FAQ] SRC4192: Differences between the SRC4192 and the SRC4193?
USB CODECS and DACs
[FAQ] PCM2906: Differences between the PCM290xB and PCM290xC
[FAQ] PCM2912A: Handling of UNUSED pins
[FAQ] PCM2912A: Driver requirement for using device on OS
[FAQ] PCM2912A: USB Codecs with Programmable descriptors
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.