This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TAS5825M: How to Send FAULT# and WARN# on OCP and OTP Events

Part Number: TAS5825M

Hi Sirs,

We are supporting customers to implement interrupt outputs of FAULT# and WARN# based on reference design on TAS5825 datasheet figure 151.
However, the GPIO0 and GPIO2 are not able to send interrupt outputs on abnormal conditions of over current and over temperature. 

------------------------------------------------------------------------------------------------------------
w 98 60 07 # Set B0x00 / P0x00 / R0x60 |= 0x05 (GPIO0 & GPIO2 = Output)
w 98 61 0b # Set B0x00 / P0x00 / R0x61 = 0x0b (GPIO0 = FAULTZ)
w 98 62 09
w 98 63 08 # Set B0x00 / P0x00 / R0x63 = 0x08 (GPIO2 = WARNZ)
w 98 74 10 # Set B0x00 / P0x00 / R0x74 = 0x10 (Mask Clock Fault Report)
------------------------------------------------------------------------------------------------------------

Would you please provide tips to write CFG to hook OCT and OTP events to FAULT# and WARN# on GPIO0 and GPIO2?

  

Thank you and Best regards,

Wayne Chen
08/14/2019