Hi Experts,
We paralleled two TPA3255 to get more TX power, but have thermal issue (IC keep restart).
Could you advise us for thermal grease?
and if we use thermal grease with 4.5w/mk, is it enough to avoid thermal issue?
Derek
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Experts,
We paralleled two TPA3255 to get more TX power, but have thermal issue (IC keep restart).
Could you advise us for thermal grease?
and if we use thermal grease with 4.5w/mk, is it enough to avoid thermal issue?
Derek
Hello Derek,
What is the output power you are trying to run at, and how long is held at your peak power? Is your heatsink a similar size to the EVM?
Best Regards,
Luis
Hello Derek
Was your problem resolved? If not can you provide the above information?
hello Derek,
you need to provide us PVDD, load and schematic detailed info. so our team can help you to evaluate power loss, then can go further check heatsink design related questions.
regards
Linda