hi...
I want to output HIGH or LOW from MUXOut when pll is locked.
Please tell me how.
This is to take action when it becomes UNLOCK.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hi...
I want to output HIGH or LOW from MUXOut when pll is locked.
Please tell me how.
This is to take action when it becomes UNLOCK.
Hi choi,
If you have setup MUXOUT to LD output (MUXOUT_LD_SEL = 1), MUXout pin will turn HIGH when it is locked, otherwise, it will be LOW. The logic is not configurable.
We recommend set LD_TYPE = 1 to get more accurate lock detect response.