LMK04616EVM: TICS Pro optimal setting

Hi Puneet san

Thank you for your support.

I have one more question about S1 of your picture.
Sorry, I can not see the SW position, because picture is small.
Please tell me three SW positions,
I can see the following positions.
SW1:ON
SW2:ON
SW3:ON

Is my understanding correct?

Best Regards,
Sho

Hi Puneet san

Thank you for your support.

I will recommend the resister data to my customer.

Sorry, i would like to get LMK04610 optimal setting.
Pleaasse give me resister setting data..

Best Regrads,
Sho

Hi Puneet san

Thank you for your reply.

Sorry the zip file you attached, only LMK04616 setting only.
The LMK04610 is different different from LMK04616 setting screen. 
So, please give me LMK04610 setting.

Best Regards,
Sho

Hi Puneet san

Thank you for your support.

I will evaluate LMK04610EVM with your setting resister.

Best Regards,
Sho

Hi Puneet san

Thank you for your support.

I checked the resisters of LMK04610 and LMK04616 that you provided.

Sorry , I have one more question.

The PLL1 setting is different between LMK04610 and LMK04616.
I think the different point is number of output only. So I think OSC performance is same with same VCXO using.
We should set same register setting, if we would get the optimal result about OSCout phases noise spec.

Why is there different point between LMK04610 and LMK04616.

Please give your comment about my question, I would like to get it as soon as possible.

Best Regards,
Sho

Hi Puneet san

Sorry again.

I would like to get the following data.
- OSCout Phases noise graph with your setting of LMK04610 & LMK04616.
CLKin1=122.88MHz
VCXO=122.88MHz
OSCout=122.88MHz
If it is possible, I want to get your evaluation condition.

Best Regards,
Sho