This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Using the ADS1292R,I find the signal wave of ECG will change to bad if using the channel of respiration.
please help me find the source of problem.this is my schematic design.
In addition,if I dont use the low-pass filter circuit,should there be a resistor to match the input impedance?I find the resistors(100K) can decrease the amplitude of 50Hz wave.
thank you .
Alex SmithApplications Engineer | Precision Delta-Sigma Converters
Check out our helpful resources:TI Precision Data Converters | TI Precision Labs - ADCs | Analog Engineer's Calculator | Data Converters Learning Center | Selection Guide
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
Precision ΔΣ ADCs
In reply to Alexander Smith:
Thank you for your reply.
My schematic diagram is designed according to the TI's example(tidrk32)
C36 and C38 of my design corresponds to C56 and C63 of TI's example. it is used for high-pass filter.I may try to replace 0R resistor.
In reply to Ryan Andrews:
Yes,What you said is what I want to express.
I didnt save the result wave diagram.I cant distinguish the ECG wave if I weld the respiration module circuit ,It is random wave.this is my register settings
In reply to user4365468:
I weld a new PCB,this is my sample diagram.
1、No respiration channel(no C36&C38):
this is my digital-filter arithmatic
(effect is not good)
By comparison,It is better than the old pcb.I should make more digital filter and it will be good. I didn't recognize the ECG wave of the sampling wave diagram of old PCB in the past .
this is raw datas:
It is strange that the 24bit sample value is 7FFFFF of respiration channel??
It should be good,I will try other digital-filter.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.