hello,
Regarding the DACCLKSE input pin:
1. How does the input stage, electrically, look like for this signal?
2. What is the Vcom, Vi(pp) and/or any other voltage specification for this pin's signal?
thanks
Gil
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hello,
Regarding the DACCLKSE input pin:
1. How does the input stage, electrically, look like for this signal?
2. What is the Vcom, Vi(pp) and/or any other voltage specification for this pin's signal?
thanks
Gil
Hi Jim,
Any progress?
I found this post: https://e2e.ti.com/support/data_converters/high_speed_data_converters/f/68/t/651655.
How applicable is it to my question for the DAC38RF82?
thanks
Gil
hello Jim,
Still no answer from the design team?
Can I use the post above (as I wrote)?
I would still like to have additional data besides the 1Vpp.
thanks
Gil
Jim,
See the post above my last post.
It asks if I can use your reply for a post that has some relevance to mine:
I found this post: https://e2e.ti.com/support/data_converters/high_speed_data_converters/f/68/t/651655.
How applicable is it to my question for the DAC38RF82?
So, yes. I wanted to know if the 1Vpp is also applicable in my case.
And I also asked if more electrical data for DACCLKSE can be supplied.
thanks
Gil
Hi Jim,
Any update regarding minimum and maximum Vi(pp) for DACCLKSE pin?
thanks
Gil