This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

CCS/ADS8866: Readout converting data from ADS8866 via SPI protocol by MSP430FR2311

Prodigy 80 points

Replies: 2

Views: 56

Part Number: ADS8866

Tool/software: Code Composer Studio

Hi,

    I want to get a program about data transmission between ADS8866 and MSP_EXP430FR2311 via SPI protocol. The MCU (MSPFR2311) just need readout the converting data from ADS8866. I am a new learner and  not familiar with MSPFR2311. 

   Thanks a lot.

  • Hi,

       Add one circumstance: I want to adopt 3-wires CS mode which DIN is connected to AVDD.

  • In reply to Daojia Wei:

    Hello,

    We don't provide processor specific driver code for our ADCs.  The ADS8866 was used in a reference design (TIDA-01469) and the design firmware can be found on the ADS8866 product folder in the "Design resources" tab which should provide a good starting point for you.

    http://www.ti.com/product/ADS8866#design-resources-for-you

    Regards,
    Collin Wells
    Precision ADC Applications

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.