Can you help explain the differences between these devices?
Best regards,Chris HallApplications Engineer | Precision ADCs
Check out these helpful resources...TI Precision Data Converters | TI Precision Labs - ADCs | Analog Engineer's Calculator | Data Converters Learning Center | Selection Guide
Here are the key differences between these devices:
ADS1281 - This was the first ADC in ADS128x product family.
ADS1282 - Integrated a PGA & MUX in front of the delta-sigma modulator.
ADS1283 - Changed to a smaller package, reduced device's power consumption, added an internal offset to move idle tone, and added a /CS pin.ADS1284 - Added an optional reduced power mode (from 18 mW to 12 mW). SNR in the low-power mode is reduced by 3 dB.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.