This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

ADC3444: Software for evaluating the High Speed Analog to Digital Converter(ADC3444) samples.

Prodigy 80 points

Replies: 5

Views: 128

Part Number: ADC3444

We could able to configure the ADC3444 and we are able to get the samples, to check the spectral components in the samples is there any software? whether the software can able to analyze the samples and give the SFDR ?Thanks in advance.

Regards

T Ravikanth

  • Guru 61700 points

    Ravi,

    We are looking into this.

    Regards,

    Jim

  • In reply to jim s:

    Hi Ravi,

    Texas Instruments has a software GUI called HSDC Pro that provides data capture analysis. In the FFT analysis mode, you can observe metrics like SNR and SFDR. In order to use HSDC Pro with the ADC3444, an ADC3444EVM and TSW1400EVM (FPGA data capture board) is required. Please let me know if you need additional information.

    Best Regards,

    Dan

  • In reply to dBrock:

    Hello Dan

                         we made our custom board with ADC3444, my doubt is without any EVM board is there any software from texas instruments where we can evaluate the ADC3444 samples.

    Thanks in advance

    Regards

    T Ravikanth

  • In reply to Ravi Kanth:

    Hi T Ravikanth,

    Thanks for the further explanation. Do you have a way of capturing the data output of the ADC3444 in your system? If so, then we can take that data (codes is fine) and put it into a .csv (excel) file, and import into HSDC Pro. This will allow for analysis of captured data.

    Best Regards,

    Dan

  • In reply to dBrock:

    Hi T Ravikanth,

    Please open a new thread if further assistance is required.

    Best Regards,

    Dan

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.