This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS52J90EVM: ADS52J90EVM: LVDS lines electrical lenth

Part Number: ADS52J90EVM
Other Parts Discussed in Thread: FMC-ADC-ADAPTER, , ADS52J90

Dear support team,

The SLAU632B User's Guide shows the schematic (great) and the SBAS690C datasheet in paragraph 9.3 states that "LVDS routing length mismatch: The routing length of all LVDS lines routing to the FPGA must be matched to avoid any timing-related issues."

Since I'm going to use this EVM + ti's FMC-ADC-ADAPTER + Trenz TEBF0808-04A + TE0803 boards, I need to compensate for length mismatch in LVDS pairs in FPGA design.

For Trenz TEBF0808-04A + TE0803 boards, electrical lengths are specified. Could you provide me with electrical lengts (or / preferably: propagation delay times in picoseconds) for ADS52J90EVM and FMC-ADC-ADAPTER boards?

Many thanks!

Jiri