ADC08D1520QML-SP: Need help finding a compatible Zif Connector

Kevin Hansing

Trying to find a zif connector that will fit the ADC08D1520QML-SP component to do some radiation screening tests for potential flight hardware. Any thing helps.

over 4 years ago

0 dBrock over 4 years ago

TI__Genius 12780 points

Hi Kevin,

One of our device experts is looking into this. Just to be sure, are you looking for a socket to where you can drop in the ADC (no soldering)?

Best Regards,

Dan

0 Kevin Hansing over 4 years ago in reply to dBrock

Prodigy 60 points

Yes that is correct Dan.

0 Rob Reeder over 4 years ago in reply to Kevin Hansing

TI__Mastermind 20130 points

Hi Kevin,

I am still researching the socket information for you as a recommendation. I am also interested if there any specific rad testing that you share with us that needs to be performed and isn't already available.

Regards,

Rob

0 Kevin Hansing over 4 years ago in reply to Rob Reeder

Prodigy 60 points

This is customer driven and is required on a new program for preliminary latch up testing. Performing this testing on all IC's in the unit and is the only part having troubling finding a zif connector for without getting a custom connector designed and fabricated.

0 Rob Reeder over 4 years ago in reply to Kevin Hansing

TI__Mastermind 20130 points

Hi Kevin,

Understood. I am still working with the team to find out if there is a solution for you.

Regards,

Rob

0 Rob Reeder over 4 years ago in reply to Rob Reeder

TI__Mastermind 20130 points

Hi Kevin,

Unfortunately, I haven't been able to come up with much on this.

I have been told our ATE socket is a special in that it tests the pre-lead-formed part in a special carrier.

You should be able to find a 128-pin CFP socket that would fit this part depending on the lead-forming…the mechanical info is on ti.com http://www.ti.com/product/ADC08D1520QML-SP/pinout-quality

Regards,

Rob

0 Kevin Hansing over 4 years ago in reply to Rob Reeder

Prodigy 60 points

Thanks for the response Rob,

Can you let me know which company makes the custom socket for this part? As of now looks like this will be the direction I will need to take and get a custom one made, having no luck finding a standard size for the IC package.

Thanks,

Kevin Hansing

0 Rob Reeder over 4 years ago in reply to Kevin Hansing

TI__Mastermind 20130 points

Hi Kevin,

I apologize for the delay, we were final able to locate a socket.

Here is the information

Wells-CTI # 619-1280811

Also see attached.

Regards,

Rob

619-1280811-HS_B.pdf

0 Kevin Hansing over 4 years ago in reply to Rob Reeder

Prodigy 60 points

Rob, Thank you for your help. I got a couple on order!

Data converters

Data converters forum

ADC08D1520QML-SP: Need help finding a compatible Zif Connector