TI E2E Community
Audio Converters Forum
TLV320AIC3204 audio codec and TPA3007D1 audio power amplifier
You want to put the TLV320AIC3204 and TPA3007D1 in a box, and have a cable run 100 m to a second box containing the speaker and the mic?
Is my understanding correct?
Audio Applications Engineering Manager
Dallas, TX USA
Sorry, this is a somewhat unusual application, so I'm afraid I won't be able to offer you any concrete recommendations.
I think one thing you can be sure of is you need to put a mic pre-amp at the box end, and even then, your mic signal is probably going to be corrupted by the noise on the speaker wires from the class-D amp.
You will need some serious filtering and isolatino in your system...
Noise is a little tricky... You can try better shielded wires, RC filtering on the cable, DSP filtering, etc, etc.
It's very system-dependent, so you're going to have to test different things on your system to see which is most effective for you.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.