TI E2E Community
Audio Converters Forum
a question about PCM1681
i designed the PCM1681 circuit followed by the datasheet, and sclk bck lrck datain1-4 are all came
from a fpga . but once i input the sclk in the pcm1681's 5 pin(sclk)(the other input pins are float) , the dataout 1-8 are all output shaped wave between the 2.5V voltage. and the shape is like the Square wave . when i input the bck ,lrck and datain1-4 , the output is ok except the Square wave is still there.
i don't know why this happen, have u see this before? thx a lot!.
When you apply the SCLK (and no other signals), are you powering the IC?
For the second case, where you have valid clocks and data in, what is the frequency of the output square wave? Can you post some scope shots to illustrate what you're seeing?
Audio Applications Engineering Manager
Dallas, TX USA
yes , I powered the IC when apply the sclk.
and i take a picture about the dataout as below. As the picture show, the average voltage is the correct output , but some wave like squares are surrounded . and the square is about some multiple of sclk.
i am just thinking if the wave is because I just put a serial cap of 22uF behind the output but without a LPF circuit and a load large than 5kohm?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.