TI E2E Community
Audio Converters Forum
PCM3070 with DIR9001 I2S
I have a PCM3070EVM-K eval board connected to a DEM- DIR9001 eval board via CN005 of the DEM board and J14 of the TAS1020 USB controller. I have a PPS topology that switches, with a mono mux (2 to 1) between an analog input and the DIR9001 I2S output. The audio switches correctly between the analog input and the I2S input but when I disconnect the S/PDIF input to the DIR9001, the audio then becomes garbage. To restore the correct operation, I need to Build "disconnect" with the PPS and Build "download code" again (to get to blue screen). What am I missing?
I'm looking into this and will respond ASAP.
Please see this post linked here (http://e2e.ti.com/support/data_converters/audio_converters/f/64/p/191544/686586.aspx#686586)
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.