TI E2E Community
Audio Converters Forum
2 USB-MODEVM driver issues
I have 2 issues of equal importance that I could really use some help with regarding USB-MODEVM interface drivers (both are in reference to the TLV320AIC3xEVM-PDK):
Installing the USB-MODEVM drivers on a Windows 7 / Vista platform to fulfill an upcoming requirement. I've tried d/l'ing and installing the USBfirmwareV0203.zip found in this forum, and they did not work, or I'm doing something wrong. I've poked around a bit and can't seem to locate anything else right now, so I'm sort of stuck. All I need is the USB-MODEVM communication with a host PC, I have an already working board+app which uses this USB communication with a host PC running XP. When I attempt to hook this system to the Vista machine (stand-in for Win 7), it asks for location of the drivers. I point it to the unzipped folder contents of the above mentioned zip and it still says the drivers were not installed correctly.
Any help would be appreciated - I'm guessing it is something very simple/basic that I am missing or doing incorrectly.
I have two laptops which I'd like to have these drivers installed on working on for Win XP. On one of the laptops, the drivers install correctly. I can see that the device appears Device Manager as both an NI-VISA USB Device (USB-MODEVM) and a Sound, Video, and Game controller (USB Audio). I have a board+application that uses the USB-MODEVM drivers to communicate with this host PC and it works flawlessly.
On the 2nd laptop, the drivers fail to install correctly. Both laptops are identical in hardware/build.
TLV320AIC3xEVM-PDK Series Troubleshooting Guide
authored by J Arbona as a guide through this. I've followed all of the very helpful suggestions in that document, (I'd have been utterly lost without it!) but my system still can't get past the very last install step (in the document referenced above, section 3.2 Device Driver Setup, steps 4-6). I am guessing I have a conflict somewhere along the way in the install process, but I don't know where to look to try and track it down.
Again, any help would be much appreciated.
The AIC3x and AIC310x EVM-K series currently are not supported under a Windows Vista/7 environment.
If you would like, you could use the GUI software of another device to communicate to the AIC3x using the command-line interface.
The AIC3254EVM-U CS http://focus.ti.com/docs/toolsw/folders/print/tlv320aic3254evm-u.html has the EEPROM programming utility. Once installed, go to "Tools > EEPROM Writer" where you can find a tab that explains how to use the DFUTEST.exe program. That software includes v2.03 firmware which is compatible with Windows Vista/7. However, you will not be able to communicate with the AIC3x GUI if you upgrade to v2.03.
The v2.03 firmware does not use the NI-VISA driver. The device enumerates as a standard HID and USB Audio class devices. The AIC3254EVM-U CS will use the HID interface to communicate register data to the EVM.
Attached is the firmware image to restore back to the factory USB-MODEVM V0105 used by AIC3x in case you would like to roll back.
J Arbona wrote the following post at Oct 5, 2010 8:06 PM:
I have applied AIC33 EVM now, is also not supported Win7 environment???
If yes, how to solve this issue?
It is now supported in Win7. You can find the driver here: http://www.ti.com/litv/zip/slac521.
I've downloaded and installed the driver from the slac521.ZIP file several times on my windows 7 system. The driver appears to load OK when I look in the hardware devices control panel. However, when I launch the application AIC310x and then select the device (AIC3104, on the TLV320AIC3104EVM-K), I get an error dialog saying:
"Connect USB" <Retry> <Exit>
I've tried several USB ports with no luck.
Is this Win 7 driver known to work?
Make sure you also have the latest version of the GUI which can be downloaded here:
The version on the CD has a bug.
Thanks - yes, I have tried the downloaded GUI application and the downloaded driver. Still no luck.
Am having the same issues with the newest software. Still need to run the setup in XP compatibility mode or I get an error saying "the windows installer engine is corrupt". The AIC310x.exe application gives just a message box that says "Connect USB" with Retry and Exit. Has this issue been resolved yet?
I have the same problem with win7 64bit.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.