Hello,
for my application I working with the pcm2906c which works fine on the WindowsXP , but on the Windows seven the input Line is recognized as a microphone input and the gain is very high. I can't find a setting in windows.
thanks,
Simon
Simon,
Can you confirm the part is PCM2906C and not PCM2906B? PCM2906C should be recognized as a line connector. This issue has been solved on C devices, an app note is linked here. (http://www.ti.com/lit/an/sbfa020/sbfa020.pdf)
Patrick Galvin
Hi Patrick,
Hi, Simon,
This device is going thru the final steps of our release process. It should be active next week.
-d2
-----
Don Dapkus
Audio Applications Engineering Manager
Dallas, TX USA