TLV320AIC10 / setup and hold time for DCSI

K.Yaita

Guru 29690 points

Hi Team,

My customer uses direct configuration mode and asked me about timing requirement for DCSI.

Are "Setup Time(MIN)" and "Hold time(MIN)" for DCSI same as for DIN(following value)?

'I'd like to confirm just in case.

Best Regards,

Yaita / Japan disty

0 Don Dapkus over 9 years ago

Hi, Yaita-san,

Unfortunately, we don't have that data for this old device.

If possible, I would suggest looking at one of our newer devices instead.

-d2

0 K.Yaita over 9 years ago in reply to Don Dapkus

Guru 29690 points

Hi Don-san,

Thank you for your reply.

I will continuously recommend another device to my customer.

Best Regards,

Yaita

Audio forum