GDE probe point

Kevin Chang2

I use GDE to build process flow for AIC3256. In my process flow, several probe points were setup to monitor the data. I found that in probe point debug, the min collection freq is 0.5 sec which is too coarse for my observation. Is there any way to reduce the collection frequency to 0.1 sec? Thank you.

over 9 years ago

0 Converter Apps over 9 years ago

TI__Mastermind 28585 points

Hi Kevin,

I have asked my colleague to take a look at this.

Best Regards,

dave

0 J- over 9 years ago

TI__Mastermind 46195 points

Hi Kevin,

The min is 0.5 seconds. The tool is not meant to show real time data and is more for debugging purposes. The USB control transaction speed is also limiting the practical acquisition interval.

Regards,

J-

0 Kevin Chang2 over 9 years ago in reply to Converter Apps

Prodigy 230 points

Hi Dave,

Thank you. The version of PPS that I use is 5.95 build 1 revision 28519.

Kevin

Audio

Audio forum

GDE probe point