TI E2E Community
Audio Converters Forum
Using MSP430 to drive PWM audio
While this should in theory work, and I believe customers have done this with the MSP430, we do not have any information on how to interface the MSP430 to our audio devices. If this is something that would interest you, please reply to this post so we can judge the interest out there for such an app note.
Audio Applications Engineering Manager
Dallas, TX USA
I definitely need to get a 4kHz PWM signal on a pin which will sound a buzzer/alarm. I'm using MSP430f6723.
I'm searching the other solutions, but the rates that are being used are much, much lower.
There are a couple app notes out there describing how to do audio on the MSP430. If you can't find them, I suggest you post a new thread in the MSP430 forum.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.