TI E2E Community
Audio Converters Forum
PCM1704 in non-oversampling mode
Currently I am using an AD1865 chip in non-oversampling mode in my 16/44 DAC. My intention is to make my next generation DAC 24/96. The PCM1704 seems to be one of the best R2R chips available that has no internal oversampling or I/V conversion. I'm having trouble finding information on how to implement this chip in non-oversampling mode. My current AD1865 design uses a 74HC02 to separate the L and R serial signal. I was wondering if this would work just as well on the PCM1704 or if there are any other recommendations as to converting an I2S signal into BCLK, WDCLK, DOL, and DOR without a digital filter chip in between the digital receiver and the PCM1704 chips.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.