This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SRC4392EVM-PDK: Missed CD-ROM for SRC4392EVM-PDK

Part Number: SRC4392EVM-PDK

Good Morning there,

One of our customer's has received your part # SRC4392EVM-PDK from us, MOUSER ELECTRONICS .

Unfortunately, there was no CD-ROM included in the package as indicated in your datasheet. There is no other issue with, so would it be possible to digitally send software, drivers etc what are included in the missed CD to me or directly to our customer?

Cheers

Pedro Calomarde

2 Replies

  • Hi, Pedro,

    Welcome to E2E, Thanks for your interest in our products!.

    The GUI for the SRC4392 is very old, has known issues  and is only supported in Win XP, so probably that's why the CD-ROM is no longer provided.

    In this post you can find a proposed solution for the configuration of the SRC4392EVM using the TLV320AIC3254 GUI.

    I will check if we have the original SRC4392 software available for reference.

    Best Regards,

      -Diego Meléndez López
       Audio Applications Engineer

  • Good Afternoon, 

    I received the test board #SCR4392EVM-PDK without the CD-ROM.

    I have tried using TLV320AIC3254EVM-U - Graphical User Interface (GUI) Software (v1.2.1) (Rev. A) for the configuration of the src 4392, but i have bus erros and i dont find the solution. 

    I would like if i can get the former software.

    Regards

    Alberto

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.