As you know,If the Data Converters use an external reference,sometimes we may use an amplifier as a buffer.
There are some questions as below:
1.Why do we use an amplifier as a buffer for the external reference?
2.How to choose a right amplifier? What parameters must be considered?
The Reference Driver Design section of this document (TIPD115) gives a comprehensive description of the key equations and parameters related to the design of the amplifier to buffer the external reference.
I hope this helps.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.