TI E2E Community
/etc... Data Converters
/etc... Data Converters Forum
Designing SINC3 filter using matlab simulink
We were trying to simulate sinc3 filter in matlab simulink. As you may know, sinc3 filter consists of 3 integrators followed by 3 differentiators. Each integrator & differentiators are designed using a DFF and a summer. We have modeled it in simulink, but while trying to run it, we are getting some error. Attached is the screenshot of circuit & error.
Please help us solve it.Thanks in advance for all replies.Regards,abdj
The precision Data Converter Forum is meant for questions about a specific part or parts - general questions like yours are usually placed here in the 'etc' forum. Have you talked with the MathWorks/Simulink folks to try and resolve this error?
No Tom. We have not discussed with any Simulink people. We are not sure in which forum we should place our doubt. Can you point us to the specific forum for MATLAB.
You might try this link:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.