Looking for the correct ADC12J1600 EVM schematics.

Vikram Padman

Other Parts Discussed in Thread: TRF3765, ADC12J4000EVM, LMX2581

Hi,

The schematics (slac649a.zip) posted in the web site for ADC12J1600-EVM is for ADC12J4000-EVM. These two board have different clock generation chips so please post the schematics for ADC12J1600-EVM.

Thank You

Vikram Padman

over 7 years ago

0 Jim Brinkhurst1 over 7 years ago

TI__Mastermind 43870 points

Hi Vikram

The old version of the ADC12J4000EVM and ADC12J1600EVM used the LMX2581 as the ADC clock source. The newer revision (Rev A) uses the TRF3765. The schematics for the newer version are available for download in the respective EVM tool folders.

The schematics for the older revision are attached in this similar earlier E2E post:

https://e2e.ti.com/support/data_converters/high_speed_data_converters/f/68/p/444388/1595525#1595525

Best regards,

Jim B

0 Vikram Padman over 7 years ago in reply to Jim Brinkhurst1

Prodigy 30 points

Jim B,

I did not know I had the old version of the EVM, thank you for letting me know that and for the schematics.

When will the new version of this board be available for sale? (According to this web page www.ti.com/.../adc12j1600evm the still has LMX2581 for clock generation) Also, it would nice if the EVM's part number part number reflects the changes in the newer version, as it is hard to find which version of this board is being sold by the distributors.

Thank You

Vikram Padman

0 Jim Brinkhurst1 over 7 years ago in reply to Vikram Padman

TI__Mastermind 43870 points

Hi Vikram

I'm checking the current inventory and build plans. I'll let you know if the new revision EVM will be available soon.

Best regards,

Jim B

0 Vikram Padman over 7 years ago in reply to Jim Brinkhurst1

Prodigy 30 points

Thank You

0 Jim Brinkhurst1 over 7 years ago in reply to Vikram Padman

TI__Mastermind 43870 points

Hi Vikram
Sorry for taking so long to follow up.
I had one pulled from stock to check, and the new version of the ADC12J1600EVM is in stock.
Best regards,
Jim B

Data converters

Data converters forum

Looking for the correct ADC12J1600 EVM schematics.