ADC10080EVAL: WAVEVISION5.1 and ADC10080EVAL

masahiko shimizu

Guru 11235 points

Part Number: ADC10080EVAL

Hi,

Could you let me know whether WaveVison 5.1 is supported ADC10080EVAL or not, please?

I looked at the following post.
e2e.ti.com/.../1655592
But this was posted in 2015. Now, Has it cleared?

Best regards,
Shimizu

over 7 years ago

0 Jim Brinkhurst1 over 7 years ago

TI__Mastermind 43930 points

Hi Shimizu

The ADC10080EVAL is not supported by WaveVision 5.1.

We are developing updated TSW1400-compatible EVMs for a number of these older ADC products but this one is still pending.

Best regards,

Jim

0 masahiko shimizu over 7 years ago in reply to Jim Brinkhurst1

Guru 11235 points

Hi Jim,

Thank you for your support.

Could you let me know whether ADC10080EVAL is supported by WAVEVSN-BRD-4.4, please?

At current status, Should we use WAVEVSN-BRD-4.4 at using ADC10080EVAL?

Best regards,
Shimizu

0 Jim Brinkhurst1 over 7 years ago in reply to masahiko shimizu

TI__Mastermind 43930 points

Hi Shimizu

The ADC10080EVAL is compatible with that older data capture board that you mention, but I'm not sure if you can find any to buy anywhere. I couldn't find any at https://store.ti.com/

There may also be a problem using the old Wavevision 4 software on modern Windows PCs. It was originally developed on Windows 9x.

Regards,

Jim B

0 masahiko shimizu over 7 years ago in reply to Jim Brinkhurst1

Guru 11235 points

Hi Jim,

Thank you for your reply.

I understand it.

Best regards,

Shimizu

0 masahiko shimizu over 7 years ago in reply to masahiko shimizu

Guru 11235 points

Hi Jim,

Could you tell me anything of development environment to use ADC10080EVAL, please?

Best regards,
Shimizu

0 Jim Brinkhurst1 over 6 years ago in reply to masahiko shimizu

TI__Mastermind 43930 points

Hi Shimizu

We don't currently have a capture board for the ADC10080EVAL.

We are investigating developing an updated version of the board that would be compatible with one of the roadmap LVDS capture boards, but it will take at least 2-3 months before that is available.

Best regards,

Jim B

Data converters

Data converters forum

ADC10080EVAL: WAVEVISION5.1 and ADC10080EVAL