Part Number: TSW40RF80EVM
I am using TSW40RF80EVM with Xilinx ZCU102 board. The TI RF board uses its own power, I suppose it should be safe matting with the ZCU102 board. I am asking this because some of the pins such as CAR_SYSREFP (G6), ADC_SYNC_P (G12) etc. are connected directly without any capacitors. I just need some clarification from TI to make sure it will not harm the FPGA board or vice versa. Thanks
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.