ADS42LB69: Does this chip have a SINAD vs Input Frequency vs ENOB graph?

Zhan Cheng Ng

Part Number: ADS42LB69

Hi,

I would like to understand what is the enob and sinad I will be having from this chip if I'm using at frequencies 500MHz and above.

Does anyone has a plot like that?

Here is an example for chip AD9226:

www.analog.com/.../MT-003.pdf

Please refer to page 5.

Thank you.

over 6 years ago

0 dBrock over 6 years ago

TI__Genius 12780 points

Hi Zhan Cheng Ng,

The datasheet does not give any information for input frequencies above 300 MHz (page 18 of datasheet

)

The ENOB at 300 MHz is (72.2(SNR)-1.76)/6.02 = 11.70 LSBs.

I will look further at whether or not this data can be obtained, and get back with you soon.

Best Regards,

Dan

0 Zhan Cheng Ng over 6 years ago in reply to dBrock

Prodigy 30 points

Hi Dan,

Thanks for the reply. I hope to hear from you so I can have better understanding of the chip.

Once again, thank you.

Best Regards,

Zhan Cheng

0 dBrock over 6 years ago in reply to Zhan Cheng Ng

TI__Genius 12780 points

Hi Zhan Cheng,

I have some unofficial data that was collected that I can send you in a message.

Best Regards,

Dan

0 Zhan Cheng Ng over 6 years ago in reply to dBrock

Prodigy 30 points

Hi Dan,

Can you send it to my mail? nzhanche@dso.org.sg

Thanks for the help!

Best Regards,

Zhan Cheng

0 dBrock over 6 years ago in reply to Zhan Cheng Ng

TI__Genius 12780 points

Hi Zhan Cheng,

I have sent the data that I have available to the listed email address.

Hope that helps!

Best Regards,

Dan

Data converters

Data converters forum

ADS42LB69: Does this chip have a SINAD vs Input Frequency vs ENOB graph?