TI E2E Community
Precision Data Converters
Precision Data Converters Forum
ADCPRO Data monitor Shell
I am using the MMB3 with the ADS1015. i am using the dc power supply and my input is 2.0 vdc. the little screen on the MMB3 ( set to Gain 1 and the AIN0, graound) gives a result of 7FF. the EVM is on ADS1015 is set to Gain 1 and AIN0, ground. but when I select the Acquires gives me a result of 6FF0.
when I do the calculation which are decimal of 40E = (1038/ 2^11) 4.096.= 2.07 volt which actually the input voltage.
however when i click acquire i get a reading of 30E=( 782/ 2^11) 4.096 = 1.564 volts of the voltage input.
what is the relation of this reading or help me to understand the data in the attached pic please.
4.096 is the factor given by the gain setting ( given on the data sheet of ADS1015)
There appears to be an error in the data monitor window. I will have to do some checking into this as the data is showing 16 bit data instead of 12. This window is supposed to show you the decimal code value and the hex value.
Have you looked at the Multi-scope test plugin? What voltage is shown there? If you are seeing a lower voltage, you might want to verify that your input ground is well connected to the ground of the EVM.
We did some further investigation and have found a 'bug' in the code. We appreciate you alerting us to the problem. We should have an update to the ADS1015EVM plugin for ADCPro available on Monday. We'll let you know when the new plugin is available for downloading.
thank you! Please let me know when the update is available. I will be waiting on Monday for any response. Again thank you for your help.
Hello Bob! Any progress updating the ADS1015EVM
The update is complete. The product page will be updated soon, meanwhile you can go to this location to download the new plugin:
Can I updated when I open the launch pro again. or to updated this way I have to wait longer?
I'm in the process of updating the launcher's web resources. It should work soon-ish.
ok I wait until you updated the launcher website. can you let me know when it is available in the website please.
The Launcher's resources are updated. The product page will update over night.
thanks for your help. i already did with the link that you send me. now it works fine. Again thank you for your help....
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.