This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Could you please share the final schematics of the ADS1293EVM. The schematics included in the User guide does not correlate to the EVM.
Hi Sai Ram,
Thank you very much for bringing this to our attention. We'll check to see if there are any pending updates for the ADS1293 EVM schematic and get that posted as soon as possible.
In reply to Tom Hendrick:
I just received a new ADS1293 board from the E-Store and I also agree that we are missing the latest schematic and User Guide. Jumpers have changed, etc.
Please post new info as soon as possible.
Apologies for the delayed reply; our colleagues are at CES this week. Please find the final schematic attached.
--PS. Please click Verify Answer below if this answered your question.
In reply to D. Johnson:
The team is working on updating the User's Guide. In the mean time, please look at the schematic attached in my previous post.
As far as the jumpers, if JP2 and JP3 are closed, the ADS1293 will power from the USB. If the jumpers are removed, the ADS1293 can be powered externally on JP1. In either case, there are 3.3V regulators on the board.
In reply to Sergio:
Thank you very much for the schematics
In reply to Sai Ram Mannar:
Thanks for the latest schematics, i helped. I would also appreciate a BOM and the gerbers for he ADS1293EVM. Our team are at designing now and could have great use of both!
In reply to Bo Nystedt102116:
I am attaching the BOM of the ADS1293EVM; I'll try to get a hold of the Gerbers. What kind of system are you designing and how has the evaluation board help you in that process?
I am attaching the gerbers for the ADS1293EVM.
Would it also be possible to post the eagle schematic & board files? That would be very helpful.
Best regards, Vleer Doing
i have purchased ADS1293 EVM recently, could you please share me the interfacing software for this board so that i can test the functionality of the board. and as well i wont to integrate this board to my ARM7 development board, can you help me how i have to go a head.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.