Part Number: ADS8332
I have interfaced ADS8332 with TM4C123 on SSI2.
Configured clock at 20MHz.
Writing to configuration register CMR + CFR = 0xE7BD. (proded on oscilloscope)
But reading back CFR with 0xC000 I am not getting back 0x7BD.
Please let me know where I am going wrong, attached Is my code and schematics.
Thanks and Regards,
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Keith Nicholas:
Yes REF- pin is connected to AGND. I have captured waveforms as attached.
In reply to Dileep D R:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.