TI E2E Community
Precision Data Converters
Precision Data Converters Forum
Re: ADS1232 Data Conversion
Welcome to the forum! The ADS1232 is 24 bit word length, and the code value that is output will depend on the value of the reference voltage you are using and the gain setting you are using. The formula for a single code (value of 1) is equal to 0.5*(Vref/Gain)/(2^23-1) and is expressed in volts. If you multiply that value times the result given from the ADS1232 you will receive the voltage output of your load cell.
Best regards,Bob B
i use formula equal ADC_value/(1L<<24))*(5.0/128)
if negative voltage i read 19mV only
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.