I have the DAC1220EVM and have it operarting quite nicely, however, the output amp rolls over when approaching max output. This is a property of the op-amp, as monitoring the DAC output directly, things go to nearly the rails. Can you suggest a more modern op-amp that will not roll over and be single supply?
Next, I wish to use 2 ea DAC1220's in the system I am designing and wondder about using a single crystal. It seems a shame to have two crystals.
Also, since the system has 2 devices each will have its own CS\. Can I CS\ both devices for simultaneous RESET?
Can I CS\ both devices for the simultaneous CAL procedure if I use a dead wait time? Can I poll only one device to determiine if they have both completed CAL?
We'll look over the newest single supply R2R output op amps and see what might be a better fit for you. You can supply two DAC1220s with a single TTL or CMOS clock source rather than using two crystals. You can also apply /CS to both parts at the same time if you are sending the same command - and if the two devices share a common clock source, they should finish their calibration cycle within 500ms.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.