i am working with ADS1298. i attached ADS1298 with LPC2378. In which i connected
CS = GNDRESET = VCC
DOUT = MISO
DIN = MOSI
SCK = 1.8MHZ
DDRY = Interrupt
EXT_CLK = high
but i am getting data if i will not connect DOUT to controller. Don't know why?
That's not a whole lot for us to go on. Provide schematics, layout, scope captures of the serial bus during some transactions, etc. for us to help you.
-------------------------------------- Kevin Duke Precision DAC Applications
Is your problem resolved? If not, have you got the details Kevin asked for?
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.