ADS130E08 Sample Code

Hi Geoff,

I'm not sure that we have anything outside of the code we provide with the ADS131E08EVM-PDK.  What sort of processor are you using and what application are you working on?

Tom,

I didn't find any sample / source code in the ADS130E08EVM-PDK download - only the executable application code. I am currently using a LM3S3748 evaluation board tied to the ADS130E08 module from the EVM. I am using it in an instrumentation logging application. If you have the ADS130/131 setup/acquisition code from the EVM that would be helpful.

Thanks,

Geoff

Hi, I am trying to use the ADS130E08EVM-PDK right now.  I messed around with the jumpers and now I am trying to get back to the default settings to use the evaluation software.  Can you tell me what are the jumper settings for JP8, JP9, and JP10?

I am able to get the software to synchronize with the hardware, but every time I push the button to acquire data, the program is stalled.  0% progress, and the message "DSP is collecting data" appears at the top.  Thanks.

Hello Tom,

I would like to get sample code too.

For witch processor is not important. To see witch registers has to be  set and timing is important.

So it could be any c-source You have.

regards

Joerg

We can offer the source code for the ADS131E08 evaluation module (works with C5507/9 DSP).  This might be useful for reference, but not for end-equipment use.

Let us know if you would like it and if we can use the email address in your profile to send the information to.

Hello Greg,

that would be nice. Yes You can use the e-mail address

Is it possible to get the Evaluation Board with ADS131E08 without the Dsp board?.

Thanks a lot

regards

Joerg

Mr Boge -

You should receive an email with the requested information shortly.

Regarding the ADS131E08EVM, the EVM come as part of the -PDK, which comes with the DSP board.  They are not sold as separate items.