ADS1293 EVM Data Capture Error

Igor Korsakov1

Prodigy 20 points

Other Parts Discussed in Thread: ADS1293

Hi!

I did not use the ads1293 evm for couple of months, and try to use and whan capure signal I got

Capture Data Failed, possible reason

capture thread time out, not getting any new data/

I check all register and even flash firmware to msp430 ( flashed fine), but no luck.

ADS1293 - dead ? How I can check.

Thanks

Igor

over 9 years ago

0 Sergio over 9 years ago

TI__Expert 3835 points

Hello Igor,

What version of GUI are you using and what is the firmware version? This information should be displayed in the top frame of the GUI window:

ADS1293 v#.#.# (build #) (firmware: #.#.#(build #), board: MSP430)

Thanks,

Sergio

0 Igor Korsakov1 over 9 years ago in reply to Sergio

Prodigy 20 points

ads1293 v1.2.3(Build 2) (firmware 2.0.0) (build 3) board msp430

0 Sergio over 9 years ago in reply to Igor Korsakov1

TI__Expert 3835 points

Hello Igor,

Did you manage to overcome the issue? Please let me know otherwise.

Thanks,
Sergio

0 Daniel Bitencourt Pereira over 8 years ago in reply to Sergio

Prodigy 10 points

I am getting the same error, do you have any idea that could help?

0 Vishy Viswanathan over 8 years ago in reply to Daniel Bitencourt Pereira

TI__Mastermind 21685 points

I couldn't reproduce this issue. To debug, make sure all the board jumpers are in place. Make sure you are not connected to a hub but a true USB port. Also, finally try uninstall and reinstalling the software.

Data converters

Data converters forum

ADS1293 EVM Data Capture Error