Hi! Does anybody know how to interface the ads1252 to a microcontroller (arduino specifically)?
Thanks in advance!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi t90ad,
Welcome to the TI E2E forums!
I can help answer any specific ADS1252 related questions you may have... Interfacing to the ADS1252 should be straightforward because you need only to clock out data following a /DRDY interrupt.
You might find this document helpful: INTERFACING THE ADS1251/52 TO THE MSP430F449
For Arduino code, you're welcome to search the E2E forum. Perhaps this related thread may help:
Best Regards,
Chris
Actually I found his link previously http://www.ti.com/lit/ug/sbau042/sbau042.pdf where they document how to design the front end of the chip. I was wondering if someone has a specific circuit design for the arduino. I'll keep tinkering with adc and will post results when I get the chance. Thanks again!
Hi t90ad,
Cool! I didn't know that there was documentation for the ADS1252EVM!
Unfortunately, that project was never completed and released as an orderable on the TI store (like our other EVMs). However, you are very welcome to reference that document for your own design!
Best Regards,
Chris