Other Parts Discussed in Thread: PGA450-Q1, TIDA-00151,
How can i run my application from OTP memory. The OTP memory already programmed during my DEVRAM based development.Can i reprogram my final code into it?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
How can i run my application from OTP memory. The OTP memory already programmed during my DEVRAM based development.Can i reprogram my final code into it?
Ok.
I programmed to receive data in my COM port.Its working fine and i need to test 4 sensor pcb and get data to cover my entire vehicle width.
1.How can i test my multiple sensor PCB.
2.Can i program DEVRAM of multiple device through GUI with out removing the supply.
1. Can i connect multi device through same UART/RS232. So that my RPAS master ECU device can read 4 sensor data by using address and switch on the buzzer based on the object distance.
2. Once i disconnect TI-GER board the EVM stopped the function.Then how can i run all 4 board.