• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 387 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC60508: Is it possible to set 3-state output for DAC60508?

K.Yaita
Guru 29690 points
Part Number: DAC60508

Hi Team,

Is it possible to set 3-state output for DAC60508?


I believe it isn't but would like to confirm just in case.
(I think the output is just connected to GND through a 1kohm resistor in power-down mode.)

Best Regards,
Yaita / Japan disty

  • 0
    TI__Genius 14220 points
    Hi Yaita-san,

    Thank you for your query. You're right that the power down cuts off the amplifier and connects the output to a 1k pull-down. We don't have a high-Z option for DAC60508.

    Regards,
    Uttam Sahu
    Applications Engineer, Precision DACs