Blackhawk™, a leader in the design of digital signal processor (DSP) hardware and software development tools, today announced the first fully-integrated wireless JTAG emulator (USB510W) for Code Composer Studio™ integrated development environment (IDE) version 5.1 from Texas Instruments Incorporated (TI).
The USB510W has an embedded 802.11 b/g/n wireless transceiver so that it requires no physical connection to a computer in order to debug using Code Composer Studio IDE. The primary benefit of this capability is to completely isolate the debug, test and development computer from the target system. This will protect the developer from harsh environments and the development computer from damaging ground loop voltages, such as those found in high-voltage motor control applications.
"This is needed functionality for customers who are debugging any line-connected equipment where voltage isolation is required, including electric motor drives," said Chris Clearman, worldwide marketing manager, Motor Control Solutions, TI. "This means the debug engineer does not have to be tethered to the target, or even in the same room."
The integrated wireless feature of the USB510W is capable of supporting the following wireless protocols and speeds: 802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5 & 65 Mbps; 802.11ag: 6, 9, 12, 18, 24, 36, 48, & 54 Mbps, and 802.11b: 1, 2, 5.5 & 11 Mbps.
The USB510W software is fully integrated with Code Composer Studio IDE and offers a high-speed USB 2.0 host connection that can be used for wireless configuration and emulation debug. Other features include a 20-pin cTI JTAG cable connection, pin converters for other target headers, operational LEDs for the USB and wireless interfaces, auto-ranging TCK up to 50 MHz and target I/O support from 1.8 to 5.0 volts.
The USB510W supports TI's embedded fixed- and floating-point processors, including Stellaris® ARM® Cortex™-M microcontrollers (MCUs), Sitara™ ARM9™ and ARM Cortex-A8 microprocessors, DaVinci™ digital media processors, OMAP™ mobile applications processors, C6000™ and C5000™ DSPs and real-time control C2000™ MCUs.
Blackhawk JTAG Emulators and other development tools are available for immediate delivery in the U.S. andCanada through Corelis in Ceritos, CA and Ultimate Solutions (USI), based in Tewksbury, Mass., and a global network of industry resellers. Please visit www.blackhawk-dsp.com/resellers.aspx for a complete list.
Hi, as you can see www.blackhawk-dsp.com/resellers.aspx is a broken link, the right one is www.blackhawk-dsp.com/Resellers.aspx
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.