I'm trying to connect CCSv5 and xds100v3. The target is dm365EVM from spectrum digital.
I set with the default configuration.
target configuration is as below.
Connect : Texas Instruments XDS 100v3 USB Emulator.
Board or Devide : EVMDM365.
After set like above, and click the Test Connection, some error messages come out.
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
-----[Print the reset-command software log-file]-----------------------------
This utility has selected a 100- or 510-class product.This utility will load the adapter 'jioserdesusbv3.dll'.The library build date was 'Oct 27 2011'.The library build time was '17:12:35'.The library package version is '5.0.520.0'.The library component version is '184.108.40.206'.The controller does not use a programmable FPGA.The controller has a version number of '4' (0x00000004).The controller has an insertion length of '0' (0x00000000).This utility will now attempt to reset the controller.This utility has successfully reset the controller.
-----[Print the reset-command hardware log-file]-----------------------------
The scan-path will be reset by toggling the JTAG TRST signal.The controller is the FTDI FT2232 with USB interface.The link from controller to target is direct (without cable).The software is configured for FTDI FT2232 features.The controller cannot monitor the value on the EMU pin.The controller cannot monitor the value on the EMU pin.The controller cannot control the timing on output pins.The controller cannot control the timing on input pins.The scan-path link-delay has been set to exactly '0' (0x0000).
An error occurred while hard opening the controller.
-----[An error has occurred and this utility has aborted]--------------------
This error is generated by TI's USCIF driver or utilities.
The value is '-501' (0xfffffe0b).The title is 'SC_ERR_TEST_MEASURE'.
The explanation is:The built-in scan-path length measurement failed.The built-in scan-path reliability tests cannot beperformed without knowledge of the scan-path length.Try specifying the scan-path lengths in the command-lineoptions or board configuration file of this utility or debugger.
Do I need to another setup?
Generally we only see people use XDS100v3 with cJTAG (1149.7) based devices. Are you sure you have a v3 and not a v2?
If it is a v3 you need to make sure it is set to operate in v2 mode. If you go to your .ccxml file and click on the Advanced tab at the bottom you will see more details for your configuration. Select the XDS100v3 in the tree on the left. Now on the right you will see the properties for it. Depending on which CCSv5 you are using the properties may look different but for me there is one called "The Converter Usage". Make sure this is set to "Its bypassed, use 1149.1, mimic XDS100v2". The option may be a bit different in your version.
If my reply answers your question please mark the thread as answered
Thank you John.
It works now.
I changed as you recommanded but it wasn't work.
After set like you said, connection is fine but memory reference occur.
so I change the clock 1Mhz to 7Mhz. It works!!!
anyway I don't understand why it works.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.