TI E2E Community
Code Composer Studio
Code Composer Forum
error connecting to target
I m working with TMDX5535EZDSP kit.
trying to connect to target to load new code. it showing error of connecting target Error -600.
It says required dynamic library could not be located. The library isn't on search path.
please find screen shot of project explorer.
In my previous post, I have attached screen shot of project explorer.
yet issue is not resolved, waiting from suggestion from your side.
it seems your ccxml (target configuration) is set up correctly. Did you remember to click save to save it?
Could you please tell us step by step what you do and when you see the error. We still can not reproduce it here.
Hi I saved it correctly. I am telling next step one by one.
-> Click the “View” menu and select “Target Configurations” to expose theconfiguration(s) that have been built or imported. A new tab labeled “TargetConfigurations” will become available in the CCS window.
-> Expand the “User Defined” folder. Right-click on the new configuration that has beencreated and click “Launch Selected Configuration”.
-> Click “View->Debug” then click “Target->Connect Target”.
after this step it shows error
Error connecting to the target:(Error -600 @ 0x0)A required dynamic library could not be located.The library isn't on the search path.(Release 5.0.429.0)
we haven't forgot about you but I have still not been able to reproduce this. Let me see if I can get a couple more colleagues on this with me.
I am waiting for reply from you. I uninstalled CCS and installed again, at different location. Is it possible, that i will share my screen and you see whatever i have done, or you take control of it and get it resolved?
I have just started to setup eZDSP5535, and I also have the same problem with Kaumil.
As I followed all of the steps in the tutorials, I also could not connect successfully.
Please help us if you would be able to solve this issue.
My problem is resolved, I was using J1 connector. but for debugging and loading code into DSP, have to use J2 DSP connector.
This may help you.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.