Part Number: TMS320F28379D
Tool/software: Code Composer Studio
Here is the full error message:
Error connecting to the target:
(Error -151 @ 0x0)
One of the FTDI driver functions used during the connect
returned bad status or an error. The cause may be one or
more of: no XDS100 is plugged in, invalid XDS100 serial number,
blank XDS100 EEPROM, missing FTDI drivers, faulty USB cable.
Use the xds100serial command-line utility in the 'common/uscif'
folder to verify the XDS100 can be located.
CCS Version: 7.1.0.00016
ControlSuite Version: 3.4.6
Programs and Features (Arranged by Publisher):
There are no FTDI drivers located in Programs and Features.
I have tried reinstalling CCS and controlSUITE a handful of times with no luck and the same error. I have tried multiple USB cables and the F2837xD controlCARD (which I am using) has worked before and nothing has happened to it. At one point, I had been trying to figure out a different issue and probably messed up the drivers then, but I don't remember everything I did. I am running Windows 7 64 bit. I have tried to use windows update to update the XDS100 drivers under the Texas Instrument Debug Probes and it does not find anything. I have run the xds100serial command-line utility and it returns:
No XDS100 emulators were found on the system.
The controlCARD is plugged in and receiving power.
If a post answers your question, please click on "This resolved my issue" button
Are You A Beginner or New to TI's C2000™ Family? Do Check This Book!
In reply to Gautam Iyer:
I might try this, but I did find a workaround by manually updating the drivers pictured above to be Stellaris Development Board A/B (through the manual windows driver update dialog by choosing TI as the publisher). I didn't know exactly what I was doing, but after doing so it allowed the debugger to connect again. It's not the same setup I had that was working, but it seems to function.
In reply to Josh Wiens:
In reply to Christopher Chiarella:
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.