Facing problems in Matlab 7.4 w.r.t linking Matlab Simulink to Code Composer to generate code

Posted by Sajal Harmukh

on Jan 28 2012 05:09 AM

Sir,

I am currently participating in the TI Analog Design Contest. I am using LF2407A eZdsp and when i try to generate code by clicking on incremental build (Using Matlab7.4) , it gives an error

Error building Real-Time Workshop target for block diagram

'open_loop'. MATLAB error message:

Error using ==> callMakeHook.p>callMakeHook at 47

The call to ccslink_ert_make_rtw_hook, during the entry hook

generated the following error:

Error using ==> i_entryHookpoint at 52

Error while creating the link for IDE.

We are not able to understand how to solve this problem. Kindly help us..

Posted by Larissa Swanland

on Feb 08 2012 11:34 AM

Expert5815 points

Hello Sajal,

First, what version of Code Composer Studio are you using?

-Larissa
Follow @MCUniversiTI

Posted by Saeid Kohan Sal Lotf Abad

on Feb 09 2012 05:30 AM

Prodigy10 points

I have the same problem. I use CCStudio v3.3. My windows is 32-bit. I try MATLAB 7.12 and 7.11, but the result is same.

When I type ccsboardinfo command in MATLAB, it can detect my F28335 cpu.

Thank you.

Saeid Kohan

kohansal@ieee.org

Posted by Sujeet Kumar Padhi

on Apr 13 2012 00:11 AM

Prodigy50 points

When I built the simulink model I got the following error :

Error building Real-Time Workshop target for block diagram 'dspafxr'. MATLAB error message:

Error using ==> callMakeHook.p>callMakeHook at 47

The call to ccslink_ert_make_rtw_hook, during the entry hook

generated the following error:

Error using ==> i_entryHookpoint at 52

Error while creating the link for IDE.

The build process will terminate as a result.

can someone tell me why I am getting this error please ???

I am using Matlab R2007A

CCS V3.1

c6713DSK

Plz sombody help me ???

Posted by Ki-Soo Lee

on Apr 13 2012 09:55 AM

Guru117055 points

Hello,

These are simulink error messages. I would contact Mathworks for support as they will have the most expertise.

Thanks

-----------------------------------

Don't forget to verify answers to your forum questions by using the green "Verify Answer" button.

Did you read the CCS Forum Guidelines & FAQ? If not, PLEASE read it. If you haven't read it in awhile, please read it again to see if any updates were made.

Having CCSv5 problems? Check out the CCSv5 Troubleshooting Guide

Click here to track an issue. Enter your bug id in the "Find Record ID" box